PENDAMPINGAN PEMANFAATAN LIMBAH KAYU GERGAJI DI UMKM RIZKY JAYA

Authors

  • Asih Rini Universitas Bina Bangsa
  • Eka Lailita Eti Varina Universitas Bina Bangsa
  • Mislan Universitas Bina Bangsa
  • Ganjar Sidik Gandara Universitas Bina Bangsa
  • Lucky Setiawan Universitas Bina Bangsa
  • Irfan Muhammad Universitas Bina Bangsa
  • Muhammad Alfarizi Universitas Bina Bangsa
  • Siti Khaumaeroh Universitas Bina Bangsa
  • Fahlatul Maulud Universitas Bina Bangsa
  • Lutfi Septiyadi Universitas Bina Bangsa
  • Firman Ardiansyah Universitas Bina Bangsa
  • Azdi Universitas Bina Bangsa

Keywords:

Papan partikel, Furniture, Limbah serbuk gergaji

Abstract

Sawdust waste is usually thrown away, where there is no added value. This is why a mentoring program is held to utilize sawdust waste to make particle board raw materials for making furniture using a simple press. A hydraulic press can help make particle board raw materials with a size of 30x20 cm and a thickness of 1.2 cm. This mentoring activity aims to utilize sawdust waste into raw board materials that can be used to make valuable furniture products to increase the economic value of waste that has no value. This waste utilization mentoring uses several methods. The implementation method includes making manual press molds, producing particle board from sawdust waste, socializing the process to owners, and documenting the product results. The results of this mentoring show that MSME owners gain knowledge that sawdust can be processed into particle board raw materials to make other furniture from sawdust.

References

A, I. R. (2018). PEMBUATAN PAPAN PARTIKEL CAMPURAN SERBUK KAYU AKASIA DAN SABUT TANDAN KOSONG KELAPA SAWIT DENGAN PENGEMPAAN SEDANG. Skripsi.

Adiansyah, Gultom, E., Halawa, E., & Zebua, S. H. (2023). Pemanfaatan Serbuk Kayu Sebagai Papan Partikel. Jurnal Abdimas Mutiara, 4(2), 322–324.

Aruan, R. sagita, Jumiati, E., & Husnah, M. (2023). Pengaruh Penambahan Bulu Ayam dan Serbuk Kayu Terhadap Uji Fisis Papan Partikel. Jurnal Fisika Unand, 12(4), 646–650. https://doi.org/10.25077/jfu.12.4.646-650.2023

Firdasari, Fauzia, A., Amin, M., & Fahriana, N. (2023). Pemanfaatan Limbah Serbuk Kayu Menjadi Papan Partikel Menggunakan Alat Tekan Multiguna “HYPRESSA.” ALAMTANA Jurnal Pengabdian Masyarakat UNW Mataram, 4(2), 224–232. https://doi.org/10.51673/jaltn.v4i2.1822

Hermita, R. (2016). PENGOLAHAN LIMBAH SERBUK KAYU MENJADI BAHAN MEBEL. Jurnal Proporsi, 2(1), 1–12.

Limbah Serbuk Kayu untuk Bahan Campuran Paving Block di Pabrik Briket Bukit Asam, P. P., Fadhilah, A., & Sanjaya, A. (2025). Pemanfaatan Limbah Serbuk Kayu untuk Bahan Campuran Paving Block di Pabrik Briket PT. Bukit Asam,Tbk. | DoiJITS JITS, 2(3), 149–156.

Muhdi., R. (2013). STUDI PEMBUATAN PAPAN PARTIKEL DARI LIMBAH PEMANENAN KAYU AKASIA (Acacia mangium L.). Bionatura-Jurnal Ilmu-Ilmu Hayati Dan Fisik, 15(1), 14–19.

Panuntun, B. A., Rahmadi, A., & Abidin, Z. (2021). SIFAT FISIS DAN MEKANIS PAPAN PARTIKEL DARI SERBUK KAYU KARET (Hevea bransiliensis) DENGAN BERBAGAI DOSIS PEREKAT POLYVINYL ACETATE. Jurnal Sylva Scienteae, 4(6), 1066. https://doi.org/10.20527/jss.v4i6.4608

Downloads

Published

20-02-2026

How to Cite

Rini, A., Lailita Eti Varina, E., Mislan, Sidik Gandara, G., Setiawan, L., Muhammad, I., … Azdi. (2026). PENDAMPINGAN PEMANFAATAN LIMBAH KAYU GERGAJI DI UMKM RIZKY JAYA. Abdi Kriya: Jurnal Pengabdian Masyarakat, 2(1), 73–78. Retrieved from https://jurnal.hastakriya.org/index.php/abdikriya/article/view/117

Issue

Vol. 2 No. 1 (2026): Abdi Kriya: Jurnal Pengabdian Masyarakat

Section

Articles

License

Copyright (c) 2026 Abdi Kriya: Jurnal Pengabdian Masyarakat

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Most read articles by the same author(s)